README

My Custom Altium scripts.

PCB

• AddDiffPairCompensationBumps: Adds compensation bumps to differential pairs
• CurrentColorizer: Color nets in layout from current capacity calculations or by importing a csv with your own power rail currents
• DiffPair_Finder: Finds diff pairs without needing to manually define them. Searches obscure net names as long as they are attached through a two pin component.
• FindNoNets: Searches tracks, polygons, vias, etc to see if any of them are No Net
• FindReplaceText: Find/Replace text on all or a specific layer.
• PowerPinsToNetClass: Gets all symbol pins that are electrical type Power and adds them to a layout net class
• Silkscreen_Auto_Placer: Didn't include because I already have a separate repo for this and I've pushed it to scripts-libraries Community Scripts
• SolderPasteGrid: Given a set of restrictions (min grid width, min gap, min %) try to create a grid that fits those specs to the center pad

Schematic

• Diff_Polarity_Checker: Iterates pins on schematic and compares to the net names they are connected to. If it finds a P/N mismatch or similar (PD/DN, etc) it notifies the user
• ImportPinPackageLengths: Import package delays from a csv on to a component
• CopySymbolParameterPlacement: Tries to copy parameter positions from one symbol to another
• Testpoint_Generator: Adds schematic tracks, nets, and user selected surface mount pad for every net on the design.
• UniquePartsLister: List unique BOM parts, but don't need designator annotations and can double click part in GUI to jump to part on schematic. Good for using existing parts.

DBLib

• BatchUpdateFromLibraries: Change from one part to another, but in batch fashion.

PCBLib

• PCB_Library_Merger: Merges PCB libraries

SchLib

• CheckSymbolPinsFromCSV: Compares pin names to names from a csv and exports a mismatch report

OutJob

• OutJob_RunAll: Run all output job containers by reading all output job parameters from the .OutJob file (This is just an ini file)

Half-Baked

• Assembly_Auto_Placer: Tries to rotate assembly designators as either 0 or 90 degrees and resize them to be in their bounding box.
• DbLib: Started trying to figure out how to read components from a DbLib, got some information, but not components
• ExportPCBFabNotes: Export fab notes to a text file from a given layer.
• LayoutDuplicator: This is integrated in to altium-mcp and does a better job there because AI can match the components. To do this programmatically is not as easy as it sounds.
• TombstoneFinder: Notifies user of potential tombstones using tracks, but does not use polygons