Sign in Join
Wiki copytemporary

SynEdit

Deutsch · English · Español · Français · Polski · Русский · 中文（中国） · 日本語

SynEdit is a syntax highlighting edit/memo package available on the SynEdit tab with support for many languages/syntaxes.

The SynEdit contained in Lazarus was forked from SynEdit 1.0.3, and was adapted and extended quite a lot. Changes are listed below.

Lazarus package contains a source editor component named TSynEdit, several syntax highlighters and other components used for source editing.

Licensed under the same terms as the original SynEdit (MPL or GPL).

Original vs Lazarus version

Lazarus version is maintained mostly by Martin Friebe. Martin wrote at forum, what has been added to Lazarus version since fork appeared:

Big things added to the Lazarus version:

Codebases of Delphi/Lazarus versions were independently refactored. There is very few overlap left.

SynEdit 2.0 port

An alternative port of the 2.0.x version of the original SynEdit exists. It's not actively maintained, last commit (now is Jun 2014) was at 2011.

SynEdit in the IDE

The SynEdit in Lazarus is a built-in package, because the IDE uses it itself. Therefore the package can not be removed from the installation list. To remove the entries from the component palette, the SynEditDsgn package can be removed from installation.

Using SynEdit

Highlighters

Markup

Markup provides additional coloring SynEdit Markup

Edit an existing highlighter

Sometimes you might want to edit existing highlighters (just like I wanted a few days ago) that already exist. In this example we're going to edit the highlighter for pascal-like code (classname: TSynPasSyn; package: SynEdit V1.0; unit: SynHighlighterPas.pas).

Say, what we want to reach is, that our application (lazarus in this case) differs between the three types of comments, which exist in Pascal:

pascal
  (* ansi *)
  { bor }
  // Slash

This may be helpful, if you want to differ between different types of your comments (e.g. "Description", "Note", "Reference", etc.) and want them to be e.g. colored in different ways.

Note: Just in case you break something, I suggest to make some "NEW" and "/NEW"-comments, but you don't have to

E.g. under the declaration of "tkTokenKind", write this:

pascal
  {NEW}
  TtckCommentKind = (tckAnsi, tckBor, tckSlash);
  {/NEW}
pascal
  {NEW}
  FCommentID: TtckCommentKind;
  {/NEW}
  //This creates a new field, where we can store the information, what kind of comment we have
pascal
  {NEW}
  fCommentAttri_Ansi: TSynHighlighterAttributes;
  fCommentAttri_Bor: TSynHighlighterAttributes;
  fCommentAttri_Slash: TSynHighlighterAttributes;
  {/NEW}
  //This allows us, to return different Attributes, per type of comment
pascal
  (...)
  AddAttribute(fCommentAttri);
  {NEW}
  fCommentAttri_Ansi := TSynHighlighterAttributes.Create(SYNS_AttrComment+'_Ansi', SYNS_XML_AttrComment+'_Ansi'); //The last two strings are the Caption and the stored name
  //If you want to have default settings for your attribute, you can e.g. add this:
  //fCommentAttri_Ansi.Background := clBlack; //Would set "Background" to "clBlack" as default
  AddAttribute(fCommentAttri_Ansi);
  fCommentAttri_Bor := TSynHighlighterAttributes.Create(SYNS_AttrComment+'_Bor', SYNS_XML_AttrComment+'_Bor');
  AddAttribute(fCommentAttri_Bor);
  fCommentAttri_Slash := TSynHighlighterAttributes.Create(SYNS_AttrComment+'_Slash', SYNS_XML_AttrComment+'_Slash');
  AddAttribute(fCommentAttri_Slash);
  {/NEW}
  (...)
pascal
procedure TSynPasSyn.BorProc;
(...)
  fTokenID := tkComment;
  {NEW}
  FCommentID:=tckBor;
  {/NEW}
  if rsIDEDirective in fRange then
(...)
pascal
procedure TSynPasSyn.AnsiProc;
begin
  fTokenID := tkComment;
  {NEW}
  FCommentID:=tckAnsi;
  {/NEW}
(...)
pascal
procedure TSynPasSyn.RoundOpenProc;
(...)
        fTokenID := tkComment;
        {NEW}
        FCommentID:=tckAnsi;
        {/NEW}
        fStringLen := 2; // length of "(*"
(...)
pascal
procedure TSynPasSyn.SlashProc;
begin
  if fLine[Run+1] = '/' then begin
    fTokenID := tkComment;
    {NEW}
    FCommentID:=tckSlash;
    {/NEW}
    if FAtLineStart then begin
(...)
pascal
procedure TSynPasSyn.SlashContinueProc;
(...)
    fTokenID := tkComment;
    {NEW}
    FCommentID:=tckSlash;
    {/NEW}
    while not(fLine[Run] in [#0, #10, #13]) do
(...)
pascal
function TSynPasSyn.GetTokenAttribute: TSynHighlighterAttributes;
begin
  case GetTokenID of
    tkAsm: Result := fAsmAttri;
    {OLD
    tkComment: Result := fCommentAttri; //This is commented and just backup, so it'll be ignored
    /OLD}
    {NEW}
    tkComment: begin
      if (FCommentID = tckAnsi) then
        Result := fCommentAttri_Ansi //Type is AnsiComment
      else
        if (FCommentID = tckBor) then
          Result := fCommentAttri_Bor //Type is BorComment
        else
          if (FCommentID = tckSlash) then 
            Result := fCommentAttri_Slash //Type is SlashComment
          else
            Result := fCommentAttri //If our code failed somehow, fallback to default
    end;
    {/NEW}
    tkIDEDirective: begin
(...)

If you do use lazarus, just reinstall the SynEdit-Package, if not, recompile your project/the package/<similar>.

DONE ! No seriously, you are now ready to differ between the different types of comments.

The lazarus-IDE does automatically detect, what attributes exist and shows them in the options, such as saves them, if you change them. If your application/IDE doesn't do this, you will have to set Color/Font/etc. of the new Attributes somewhere manually (e.g. in the constructor of TSynPasSyn)

Completion plugins

There are 3 completion plug-ins for SynEdit:

TSynCompletion

Example code to invoke the completion pop up programmatically (i.e. without pressing the keyboard shortcut):

pascal
YourSynEdit.CommandProcessor(YourSynCompletion.ExecCommandID, '', nil)

TSynAutoComplete

TSynEditAutoComplete

Todo: Differences between 2nd and 3rd need to be documented. Maybe they can be merged.

Logical/Physical caret position

SynEdit offers position of the caret (text blinking cursor) in 2 different forms:

Both are 1-based. Currently Y coordinates are always the same. This may change in future.

The Physical coordinate
is the position in the display grid (ignoring any scrolling). That is:

the letter "a" and "â" take both ONE cell on the grid, increasing physical x by 1. Even though in utf8 encoding "a" takes one byte, and "â" takes several bytes.

however the tab char (#9), besides being just one byte and one char, can take several cells in the grid, increasing the physical x by more than one. There are also some chars in Chinese and eastern languages, that take 2 grid positions (google full-width vs half-width char)

The Logical coordinate
is the byte offset in the string holding the line.

the letter "a" has 1 byte and increases by 1

the letter "â" has 2 (or 3) bytes, and increases by that

tab has 1 byte and increases by that.

Neither of the 2 give the position in UTF8 chars/code-points (e.g. for Utf8Copy or Utf8Length).

The physical X is always counted from the left of the text, even if this is scrolled out. To get the grid-x of the currently scrolled control do:

grid-X-in-visible-part-of-synedit := PhysicalX - SynEdit.LeftChar + 1

grid-y-in-visible-part-of-synedit := SynEdit.RowToScreenRow(PhysicalY); // includes folding

use ScreenRowToRow for reverse

Change text from code

Warning: Changing text via SynEdit.Lines property does not work with undo/redo.

Text can be accessed via SynEdit.Lines. This is a TStrings based property offering read/write access to each line. It is 0 based.

pascal
  SynEdit.Lines[0] := 'Text'; // first line

SynEdit.Lines can be used to set the initial version of the text (e.g. loaded from file). Note that SynEdit.Lines.Add/SynEdit.Lines.Append does not support line breaks inside the added strings. You should add lines one by one.

To modify the content of a SynEdit, and allow the user to undo the action use the following methods:

pascal
    procedure InsertTextAtCaret(aText: String; aCaretMode: TSynCaretAdjustMode = scamEnd);
    property TextBetweenPoints[aStartPoint, aEndPoint: TPoint]: String // Logical Points
      read GetTextBetweenPoints write SetTextBetweenPointsSimple;
    property TextBetweenPointsEx[aStartPoint, aEndPoint: TPoint; CaretMode: TSynCaretAdjustMode]: String
      write SetTextBetweenPointsEx;
    procedure SetTextBetweenPoints(aStartPoint, aEndPoint: TPoint;
                                   const AValue: String;
                                   aFlags: TSynEditTextFlags = [];
                                   aCaretMode: TSynCaretAdjustMode = scamIgnore;
                                   aMarksMode: TSynMarksAdjustMode = smaMoveUp;
                                   aSelectionMode: TSynSelectionMode = smNormal );

Examples:

pascal
  // Insert text at caret
  SynEdit.InsertTextAtCaret('Text');
  // Replace text from (x=2,y=10) to (x=4,y=20) with Str
  SynEdit.TextBetweenPoints[Point(2,10), Point(4,20)] := Str;
pascal
  // Delete/replace single char at caret pos
  var
    p1, p2: TPoint;
  begin
    p1 := SynEdit.LogicalCaretXY;
    p2 := p1;
    // Calculate the byte pos of the next char 
    p2.x := p2.x + UTF8CharacterLength(@SynEdit.LineText[p2.x]);
    // p1 points to the first byte of char to be replaced
    // p2 points to the first byte of the char after the last replaceable char
    // Replace with "Text" (or use empty string to delete)
    SynEdit.TextBetweenPoints[p1, p2] := 'Text';

Fold/Unfold from code

Methods for folding:

1) TSynEdit.CodeFoldAction

Folds at the given Line. If there are more than one, folds the inner most (right most). Note: This does not work with selection, nor with Folds that hide entirely / Need testing for 2ndary folds.

2) TSynEdit.FindNextUnfoldedLine

3) TSynEdit.FoldAll / TSynEdit.UnfoldAll

Bookmarks

More info

Discussions on the forum, which contain info about SynEdit:

Example apps

Example applications can be found in the folder "lazarus/examples/synedit".

Adding hotkeys for Cut/Copy/Paste/etc

Hotkeys can be implemented by using SynEdit commands.

pascal
uses
  SynEdit, SynEditKeyCmds;

procedure TForm1.SynEdit1KeyDown(Sender: TObject; var Key: Word;
  Shift: TShiftState);
begin
  if (Shift = [ssCtrl]) then
    case Key of
      VK_C: SynEdit1.CommandProcessor(TSynEditorCommand(ecCopy), ' ', nil);
      VK_V: SynEdit1.CommandProcessor(TSynEditorCommand(ecPaste), ' ', nil);
      VK_X: SynEdit1.CommandProcessor(TSynEditorCommand(ecCut), ' ', nil);
    end;
end;

Further development, discussions

See also

From the Free Pascal wiki, page "SynEdit", as it stood on 2024-03-27 after a change by Wennerer, out of the wiki's dump of 2024-05-26. Copyright stays with the author who wrote it, according to the old wiki's Licensing page. If you have concerns about this material, message the admin.

Revision 2, last changed by WikiArchive .

Talk about this page

Nobody has opened a bench for this page yet. Sign in to open one.