Enum type: what changed

Revision 2 to 3. Removed lines have a minus sign; added lines have a plus sign.

Title: ~~Enum Type~~ Enum type

Old	New		Line
1		-	~~#REDIRECT [[Enum type]]~~
	1	+	An enumeration is a custom [[Data type\|data type]] in [[Pascal]]. It is a discrete value that can be referred to by a unique [[Identifier\|identifier]].
	2	+
	3	+	## Definition
	4	+
	5	+	### Basic
	6	+
	7	+	An enumeration is defined by surrounding a non-empty [[Comma\|comma]]-separated list of identifiers that were not yet defined in the current [[Scope\|scope]] with parentheses:
	8	+
	9	+	``` pascal
	10	+	program enumerationDemo(input, output, stdErr);
	11	+	type
	12	+	fruit = (apple, banana, citrus);
	13	+	```
	14	+
	15	+	Thus, a variable of the [[Type\|type]] `fruit` may assume the values `apple`, `banana`, or `citrus`.
	16	+
	17	+	``` pascal
	18	+	var
	19	+	snack: fruit;
	20	+	begin
	21	+	snack := apple;
	22	+	end.
	23	+	```
	24	+
	25	+	### Indices
	26	+
	27	+	Every member of an enumerated type has an ordinal value which can be obtained using the [[Ord\|standard function ord]]. The first member of any enumeration has the ordinal value zero, and every following member is enumerated with consecutive numbers.
	28	+
	29	+	#### Override
	30	+
	31	+	In some cases, however, it would be quite useful if the ordinal values were different. The [[FPC]] allows [[Delphi]]-style explicit definition of indices by following member identifiers with an [[=\|equal sign]] and an [[Integer\|integer]] value:
	32	+
	33	+	``` pascal
	34	+	type
	35	+	sign = (negative = -1, none = 0, positive = 1);
	36	+	```
	37	+
	38	+	It is not necessary to define all members with an explicit ordinal value, this example just happens to define all of them. If the ordinal value is unspecified, the automatic enumeration mechanism applies again.
	39	+
	40	+	#### Properties
	41	+
	42	+	- An enumeration data type definition is ascending if the difference in ordinal value to every right-hand member is ≥ 1. Currently, non-ascending definitions merely [emit a note](https://gitlab.com/freepascal.org/fpc/source/-/tree/release_3_2_2/compiler/ptype.pas#L1700-1706). A `set` literal using two enumeration values having the same ordinal value, albeit represented by different symbols, will not be accepted.
	43	+	- An enumeration data type is contiguous if the ordinal value of every (named) member has an absolute difference of one to its neighbors. Using a `set` constructor on a non-contiguous enumeration data type may produce unexpected results.
	44	+	- An enumeration data type is normal if it is ascending and contiguous and the first member has an ordinal value of (strictly speaking) zero, or, in the broad sense (as implemented by the FPC), ≤ 0. The compiler intrinsic `typeInfo` is only available for those enumeration data types.
	45	+
	46	+	### Prefixing
	47	+
	48	+	FPC prefixes all members of enumeration type definitions in the `type` section with their corresponding type name. By default, the short name without a prefix is inserted into the symbol table as an alias in order to meet Pascal standards.
	49	+
	50	+	[[FPC New Features 2.6.0\|Since version 2.6.0 FPC]] supports disabling member identifiers from being aliased by using the `{$scopedEnums on}` [[local compiler directives\|local compiler directive]], thus requiring users to always specify the type name as a prefix:
	51	+
	52	+	``` pascal
	53	+	program scopedEnumerationDemo(input, output, stdErr);
	54	+	type
	55	+	{$scopedEnums on}
	56	+	logLevel = (error, warning, info, debug);
	57	+	var
	58	+	verbosity: logLevel;
	59	+	begin
	60	+	verbosity := logLevel.debug;
	61	+	end.
	62	+	```
	63	+
	64	+	This setting only affects definition of new enumeration data types. If the compiler switch `{$scopedEnums …}` was on during definition of a enumeration type, you have to precede any values of that enumeration type with the data type’s name and a dot (in the example above this means `logLevel.`).
	65	+
	66	+	This is useful if names are likely to clash with other identifiers, for example [`sysUtils.tUseBoolStrs`](https://www.freepascal.org/docs-html/rtl/sysutils/tuseboolstrs.html) is defined in that way (with `{$scopedEnums on}`), or if isolate identifiers would be meaningless or confusing like in [`objPas.tEndian`](https://www.freepascal.org/docs-html/rtl/objpas/tendian.html). Usage introduces some incompatibility to other compilers though.
	67	+
	68	+	## Size
	69	+
	70	+	The size an enumeration type occupies depends on
	71	+
	72	+	1. the minimum enumeration size compiler configuration, and
	73	+	2. the range, that is `ord(high(enumeration)) - ord(low(enumeration))`.
	74	+
	75	+	The local compiler directive `{$minEnumSize n}` determines the minimum size in [[Byte\|Bytes]] of an enumeration data type. `{$minEnumSize n}` is (for Delphi compatibility) an alias for `{$packEnum n}`/`{$Z}`.
	76	+
	77	+	- `{$minEnumSize 1}`, `{$packEnum 1}`, `{$Z1}` or `{$Z‑}` instructs the compiler to use just one Byte (at least) for the enumeration type in question.
	78	+	- `{$minEnumSize 2}`, `{$packEnum 2}` and `{$Z2}`: 2 Bytes minimum.
	79	+	- `{$minEnumSize 4}`, `{$packEnum 4}`, `{$Z4}` or `{$Z+}`: use at least 4 Bytes.
	80	+
	81	+	Furthermore, `{$minEnumSize normal}`, `{$minEnumSize default}` and `{$minEnumSize 0}` restores the default value. In [[Mode TP\|{$mode TP}]] the default value is `1` whereas in all other modes it is `4`. Such a “large” minimum size aids quick read/write access.
	82	+
	83	+	It stands to reason that an enumeration data type has to occupy at least as much space as all discrete values require to be stored. When there are 2<sup>8</sup> (256) or fewer elements to be stored, the compiler may store a variable of this kind as a single Byte. A range of 2<sup>16</sup> elements will be stored in two Bytes if a single Byte is insufficient. More than 2<sup>16</sup> members will be stored in four Bytes. These rules may, of course, be superseded by the previously mentioned `{$minEnumSize}` setting.
	84	+
	85	+	## Application
	86	+
	87	+	### Out-of-the-box functionality
	88	+
	89	+	- The pre-defined data type [[Boolean]] is an enumeration data type.
	90	+	- The functions `low` and `high` will give the lowest or highest available named item of an enumeration data type.
	91	+	- The standard functions `pred` and `succ` return the predecessor and successor of a value. In non-Delphi modes this functionality is disabled if the enumeration data type is non-contiguous. Note that range checks may trigger [[runtime error\|run-time errors]].
	92	+
	93	+	### Masks
	94	+
	95	+	Enumeration data types are particularly useful for implementing “masks”: By defining a [[Set\|set of …]] you have a neat data type fulfilling certain nice properties.
	96	+
	97	+	## Comparative remarks
	98	+
	99	+	In some programming languages enumeration type definitions become “synonyms” to certain integer values. In Pascal, however, this is not the case. You may not mix a symbol referring to a member of an enumeration with other integer values. You will have to utilize `ord` or an [[Typecast\|explicit typecast]] to the enumeration data type.
	100	+
	101	+	## See also
	102	+
	103	+	- [[Basic Pascal Tutorial/Chapter 5/Enumerated types\|Enumerated types]] in the [[Basic Pascal Tutorial]] series
	104	+
	105	+	---
	106	+	From the Free Pascal wiki, page "Enum type", as it stood on 2023-12-22 after a change by Alextpp, out of the wiki's dump of 2024-05-26. Copyright stays with the author who wrote it, according to the old wiki's [[Licensing]] page. If you have concerns about this material, [message the admin](/wiki-contact).

Back to history