>> 01/15/01 09:19AM >>> Two things: Make sure you have pulled the latest version of LAzarus from CVS. Also, make sure you are using make clean make lazarus the first time you do this and be sure you have FPC version 1.0.5

Hey try this: Update from CVS type this when in the lazarus dir. make clean; make OPT=-dDEBUG ./lazarus That seems to work for me. Shane >>> 01/16/01 10:18AM >>> I have the same problem and I cannot solve it. I surrender. :-) Shane Miller wrote: > > Yes, there still seems to be SOME problem with how everything is being > compiled. > > When I encounter this I do this: > > make clean > make lazarus > ./lazarus > > If it crashes I do this: > > make clean > go into designer, lcl, lcl/interfaces/gtk and delete all the *.o and *.ppu > files > make lazarus > ./lazarus > if it crashes I try this > > make clean > touch lcl/controls.pp > make lazarus > > if it crashes I do this > OPen uniteditor.pp. Change something, then change it back. Save it. OPen > customformeditor.pp. Change something, then change it back. > make lazarus > > If it crashes I start with the swearing (ok, I started that a while back) > and I punt. I have setup my ppc386.cfg file to work and so I can do this: > > ppc386 -B lazarus.pp > Sometimes that will work. > > I don't know what the problem is. It doesn't seem to be in the code because > it's not consistent. > > Shane > > -----Original Message----- > From: Andy Clay > To: > Date: Monday, January 15, 2001 6:54 PM > Subject: Re: [lazarus] Run error FIXED!!! > > >I just did a cvs update lazarus, make clean, make - and it still errors > >on running. I am using 1.0.5 compiler. > > > >response to run is - > > > >LM_SCREENINIT called --> should go to GTKObject.Init > >TODO: check this > >[TCustomForm.Create] Resource 'TSPLASHFORM' not found > >This is for information purposes only. This is not critical at this > >time. > >[TCustomForm.Create] Resource 'TMAINIDE' not found > >This is for information purposes only. This is not critical at this > >time. > >An unhandled exception occurred at 0x080E00FF : > >Access violation > > 0x080E00FF > > 0xBFFFF5F0 > > 0x080E0F6E > > 0xBFFFF618 > >An unhandled exception occurred at 0x080DCDBA : > >Access violation > > 0x080DCDBA > > 0x3020200C > > 0x00000000 > > > >An unhandled exception occurred at 0x00000020 : > >Access violation > > 0x00000020 > > 0x080B0FFC > > 0x080E1BCF > > 0x080B12BF > > 0x080D3C8B > > 0x080D3C37 > > 0x080B8955 > > 0xBFFFF70C > >An unhandled exception occurred at 0x080DCDBA : > >Access violation > > 0x080DCDBA > > 0x3020200C > > 0x00000000 > > > >[TgtkObject.Destroy] WARNING: There are 24 unreleased DCs and 127 > >unreleased GDIObjects > >[TgtkObject.Destroy] WARNING: There are 4 messages left in the queue! > >I'll free them > >An unhandled exception occurred at 0x080E00C8 : > >Access violation > > 0x080E00C8 > > 0x00000001 > > 0x081360DC > > > > > >Cheers... Andy > > > >Shane Miller wrote: > >> > >> OK, I found the error. It was actually an error in Main.pp but the > exception was thrown in the resources file. > >> > >> Either way, it's fixed. Please pull from CVS to get the latest verison > of Lazarus. > >> > >> Please email the list that I am correct that this error is fixed now. > >> > >> Thanks > >> Shane > >> > >> >>> 01/15/01 12:20PM >>> > >> The problem with the latest LAZARUS code is again in the resources unit. > When it doesn't find the TToolbutton resource it goes to load DEFAULT. When > it does find it, it crashes on the line > >> > >> Result := LResource(FList[p]^); > >> wher p = 20. I'm not sure what the problem is yet with this line though. > >> > >> Shane > >> > >> >>> 01/15/01 10:40AM >>> > >> OK, I have looked at this problem and I'm not sure what's cauing it but > on this PC I can't run it either. > >> > >> I am still looking into it. > >> > >> Shane > >> > >> >>> 01/15/01 09:19AM >>> > >> > Two things: Make sure you have pulled the latest version of LAzarus > from CVS. Also, make sure you are using > >> > > >> > make clean > >> > make lazarus > >> > > >> > the first time you do this and be sure you have FPC version 1.0.5 > >> > >> My problems seem to be a lot like his, and I tried to k (s- under > linux)trace > >> the problem points. > >> > >> Seems that failed read's (resource not ready or busy) from descriptors > >> created by a socket call are the problem. > >> > >> I also have a feeling the problems are within the linked in libraries. > (by > >> examining the traceback from -gl), what GTK version is now recommended? -- |-----------------------------| | Luis R. Hilario | | http://www.luisdigital.2y.net | |-----------------------------| _________________________________________________________________ To unsubscribe: mail with "unsubscribe" as the Subject archives at http://www.miraclec.com/list_archives/lazarus _________________________________________________________________ To unsubscribe: mail with "unsubscribe" as the Subject archives at http://www.miraclec.com/list_archives/lazarus

Yes, there still seems to be SOME problem with how everything is being compiled. When I encounter this I do this: make clean make lazarus ./lazarus If it crashes I do this: make clean go into designer, lcl, lcl/interfaces/gtk and delete all the *.o and *.ppu files make lazarus ./lazarus if it crashes I try this make clean touch lcl/controls.pp make lazarus if it crashes I do this OPen uniteditor.pp. Change something, then change it back. Save it. OPen customformeditor.pp. Change something, then change it back. make lazarus If it crashes I start with the swearing (ok, I started that a while back) and I punt. I have setup my ppc386.cfg file to work and so I can do this: ppc386 -B lazarus.pp Sometimes that will work. I don't know what the problem is. It doesn't seem to be in the code because it's not consistent. Shane -----Original Message----- From: Andy Clay To: Date: Monday, January 15, 2001 6:54 PM Subject: Re: [lazarus] Run error FIXED!!! >I just did a cvs update lazarus, make clean, make - and it still errors >on running. I am using 1.0.5 compiler. > >response to run is - > >LM_SCREENINIT called --> should go to GTKObject.Init >TODO: check this >[TCustomForm.Create] Resource 'TSPLASHFORM' not found >This is for information purposes only. This is not critical at this >time. >[TCustomForm.Create] Resource 'TMAINIDE' not found >This is for information purposes only. This is not critical at this >time. >An unhandled exception occurred at 0x080E00FF : >Access violation > 0x080E00FF > 0xBFFFF5F0 > 0x080E0F6E > 0xBFFFF618 >An unhandled exception occurred at 0x080DCDBA : >Access violation > 0x080DCDBA > 0x3020200C > 0x00000000 > >An unhandled exception occurred at 0x00000020 : >Access violation > 0x00000020 > 0x080B0FFC > 0x080E1BCF > 0x080B12BF > 0x080D3C8B > 0x080D3C37 > 0x080B8955 > 0xBFFFF70C >An unhandled exception occurred at 0x080DCDBA : >Access violation > 0x080DCDBA > 0x3020200C > 0x00000000 > >[TgtkObject.Destroy] WARNING: There are 24 unreleased DCs and 127 >unreleased GDIObjects >[TgtkObject.Destroy] WARNING: There are 4 messages left in the queue! >I'll free them >An unhandled exception occurred at 0x080E00C8 : >Access violation > 0x080E00C8 > 0x00000001 > 0x081360DC > > >Cheers... Andy > >Shane Miller wrote: >> >> OK, I found the error. It was actually an error in Main.pp but the exception was thrown in the resources file. >> >> Either way, it's fixed. Please pull from CVS to get the latest verison of Lazarus. >> >> Please email the list that I am correct that this error is fixed now. >> >> Thanks >> Shane >> >> >>> 01/15/01 12:20PM >>> >> The problem with the latest LAZARUS code is again in the resources unit. When it doesn't find the TToolbutton resource it goes to load DEFAULT. When it does find it, it crashes on the line >> >> Result := LResource(FList[p]^); >> wher p = 20. I'm not sure what the problem is yet with this line though. >> >> Shane >> >> >>> 01/15/01 10:40AM >>> >> OK, I have looked at this problem and I'm not sure what's cauing it but on this PC I can't run it either. >> >> I am still looking into it. >> >> Shane >> >> >>> 01/15/01 09:19AM >>> >> > Two things: Make sure you have pulled the latest version of LAzarus from CVS. Also, make sure you are using >> > >> > make clean >> > make lazarus >> > >> > the first time you do this and be sure you have FPC version 1.0.5 >> >> My problems seem to be a lot like his, and I tried to k (s- under linux)trace >> the problem points. >> >> Seems that failed read's (resource not ready or busy) from descriptors >> created by a socket call are the problem. >> >> I also have a feeling the problems are within the linked in libraries. (by >> examining the traceback from -gl), what GTK version is now recommended?

Have you ever used ppc386 lazarus.pp to compile? If so, make sure all the .ppu and .o files are deleted from the subdirectories prior to using make. See if there are and .o or .ppu files in your subdirectories and remove them. Are you using 1.0.5 from the FIXES_1_0_0 branch in FPC? Shane >>> 01/16/01 10:23PM >>> Nope - same crashes Cheers... Andy Shane Miller wrote: > > Hey try this: > > Update from CVS > > type this when in the lazarus dir. > > make clean; make OPT=-dDEBUG > > ./lazarus > > That seems to work for me. > > Shane > > >>> 01/16/01 10:18AM >>> > I have the same problem and I cannot solve it. I surrender. :-) > > Shane Miller wrote: > > > > Yes, there still seems to be SOME problem with how everything is being > > compiled. > > > > When I encounter this I do this: > > > > make clean > > make lazarus > > ./lazarus > > > > If it crashes I do this: > > > > make clean > > go into designer, lcl, lcl/interfaces/gtk and delete all the *.o and *.ppu > > files > > make lazarus > > ./lazarus > > if it crashes I try this > > > > make clean > > touch lcl/controls.pp > > make lazarus > > > > if it crashes I do this > > OPen uniteditor.pp. Change something, then change it back. Save it. OPen > > customformeditor.pp. Change something, then change it back. > > make lazarus > > > > If it crashes I start with the swearing (ok, I started that a while back) > > and I punt. I have setup my ppc386.cfg file to work and so I can do this: > > > > ppc386 -B lazarus.pp > > Sometimes that will work. > > > > I don't know what the problem is. It doesn't seem to be in the code because > > it's not consistent. > > > > Shane > > > > -----Original Message----- > > From: Andy Clay > > To: > > Date: Monday, January 15, 2001 6:54 PM > > Subject: Re: [lazarus] Run error FIXED!!! > > > > >I just did a cvs update lazarus, make clean, make - and it still errors > > >on running. I am using 1.0.5 compiler. > > > > > >response to run is - > > > > > >LM_SCREENINIT called --> should go to GTKObject.Init > > >TODO: check this > > >[TCustomForm.Create] Resource 'TSPLASHFORM' not found > > >This is for information purposes only. This is not critical at this > > >time. > > >[TCustomForm.Create] Resource 'TMAINIDE' not found > > >This is for information purposes only. This is not critical at this > > >time. > > >An unhandled exception occurred at 0x080E00FF : > > >Access violation > > > 0x080E00FF > > > 0xBFFFF5F0 > > > 0x080E0F6E > > > 0xBFFFF618 > > >An unhandled exception occurred at 0x080DCDBA : > > >Access violation > > > 0x080DCDBA > > > 0x3020200C > > > 0x00000000 > > > > > >An unhandled exception occurred at 0x00000020 : > > >Access violation > > > 0x00000020 > > > 0x080B0FFC > > > 0x080E1BCF > > > 0x080B12BF > > > 0x080D3C8B > > > 0x080D3C37 > > > 0x080B8955 > > > 0xBFFFF70C > > >An unhandled exception occurred at 0x080DCDBA : > > >Access violation > > > 0x080DCDBA > > > 0x3020200C > > > 0x00000000 > > > > > >[TgtkObject.Destroy] WARNING: There are 24 unreleased DCs and 127 > > >unreleased GDIObjects > > >[TgtkObject.Destroy] WARNING: There are 4 messages left in the queue! > > >I'll free them > > >An unhandled exception occurred at 0x080E00C8 : > > >Access violation > > > 0x080E00C8 > > > 0x00000001 > > > 0x081360DC > > > > > > > > >Cheers... Andy > > > > > >Shane Miller wrote: > > >> > > >> OK, I found the error. It was actually an error in Main.pp but the > > exception was thrown in the resources file. > > >> > > >> Either way, it's fixed. Please pull from CVS to get the latest verison > > of Lazarus. > > >> > > >> Please email the list that I am correct that this error is fixed now. > > >> > > >> Thanks > > >> Shane > > >> > > >> >>> 01/15/01 12:20PM >>> > > >> The problem with the latest LAZARUS code is again in the resources unit. > > When it doesn't find the TToolbutton resource it goes to load DEFAULT. When > > it does find it, it crashes on the line > > >> > > >> Result := LResource(FList[p]^); > > >> wher p = 20. I'm not sure what the problem is yet with this line though. > > >> > > >> Shane > > >> > > >> >>> 01/15/01 10:40AM >>> > > >> OK, I have looked at this problem and I'm not sure what's cauing it but > > on this PC I can't run it either. > > >> > > >> I am still looking into it. > > >> > > >> Shane > > >> > > >> >>> 01/15/01 09:19AM >>> > > >> > Two things: Make sure you have pulled the latest version of LAzarus > > from CVS. Also, make sure you are using > > >> > > > >> > make clean > > >> > make lazarus > > >> > > > >> > the first time you do this and be sure you have FPC version 1.0.5 > > >> > > >> My problems seem to be a lot like his, and I tried to k (s- under > > linux)trace > > >> the problem points. > > >> > > >> Seems that failed read's (resource not ready or busy) from descriptors > > >> created by a socket call are the problem. > > >> > > >> I also have a feeling the problems are within the linked in libraries. > > (by > > >> examining the traceback from -gl), what GTK version is now recommended? > > -- > |-----------------------------| > | Luis R. Hilario | > | http://www.luisdigital.2y.net | > |-----------------------------| > > _________________________________________________________________ > To unsubscribe: mail with > "unsubscribe" as the Subject > archives at http://www.miraclec.com/list_archives/lazarus > > _________________________________________________________________ > To unsubscribe: mail with > "unsubscribe" as the Subject > archives at http://www.miraclec.com/list_archives/lazarus _________________________________________________________________ To unsubscribe: mail with "unsubscribe" as the Subject archives at http://www.miraclec.com/list_archives/lazarus _________________________________________________________________ To unsubscribe: mail with "unsubscribe" as the Subject archives at http://www.miraclec.com/list_archives/lazarus

Hey try this: Update from CVS type this when in the lazarus dir. make clean; make OPT=-dDEBUG ./lazarus That seems to work for me. Shane

>>> 01/16/01 10:18AM >>> I have the same problem and I cannot solve it. I surrender. :-) Shane Miller wrote: > > Yes, there still seems to be SOME problem with how everything is being > compiled. > > When I encounter this I do this: > > make clean > make lazarus > ./lazarus > > If it crashes I do this: > > make clean > go into designer, lcl, lcl/interfaces/gtk and delete all the *.o and *.ppu > files > make lazarus > ./lazarus > if it crashes I try this > > make clean > touch lcl/controls.pp > make lazarus > > if it crashes I do this > OPen uniteditor.pp. Change something, then change it back. Save it. OPen > customformeditor.pp. Change something, then change it back. > make lazarus > > If it crashes I start with the swearing (ok, I started that a while back) > and I punt. I have setup my ppc386.cfg file to work and so I can do this: > > ppc386 -B lazarus.pp > Sometimes that will work. > > I don't know what the problem is. It doesn't seem to be in the code because > it's not consistent. > > Shane > > -----Original Message----- > From: Andy Clay > To: > Date: Monday, January 15, 2001 6:54 PM > Subject: Re: [lazarus] Run error FIXED!!! > > >I just did a cvs update lazarus, make clean, make - and it still errors > >on running. I am using 1.0.5 compiler. > > > >response to run is - > > > >LM_SCREENINIT called --> should go to GTKObject.Init > >TODO: check this > >[TCustomForm.Create] Resource 'TSPLASHFORM' not found > >This is for information purposes only. This is not critical at this > >time. > >[TCustomForm.Create] Resource 'TMAINIDE' not found > >This is for information purposes only. This is not critical at this > >time. > >An unhandled exception occurred at 0x080E00FF : > >Access violation > > 0x080E00FF > > 0xBFFFF5F0 > > 0x080E0F6E > > 0xBFFFF618 > >An unhandled exception occurred at 0x080DCDBA : > >Access violation > > 0x080DCDBA > > 0x3020200C > > 0x00000000 > > > >An unhandled exception occurred at 0x00000020 : > >Access violation > > 0x00000020 > > 0x080B0FFC > > 0x080E1BCF > > 0x080B12BF > > 0x080D3C8B > > 0x080D3C37 > > 0x080B8955 > > 0xBFFFF70C > >An unhandled exception occurred at 0x080DCDBA : > >Access violation > > 0x080DCDBA > > 0x3020200C > > 0x00000000 > > > >[TgtkObject.Destroy] WARNING: There are 24 unreleased DCs and 127 > >unreleased GDIObjects > >[TgtkObject.Destroy] WARNING: There are 4 messages left in the queue! > >I'll free them > >An unhandled exception occurred at 0x080E00C8 : > >Access violation > > 0x080E00C8 > > 0x00000001 > > 0x081360DC > > > > > >Cheers... Andy > > > >Shane Miller wrote: > >> > >> OK, I found the error. It was actually an error in Main.pp but the > exception was thrown in the resources file. > >> > >> Either way, it's fixed. Please pull from CVS to get the latest verison > of Lazarus. > >> > >> Please email the list that I am correct that this error is fixed now. > >> > >> Thanks > >> Shane > >> > >> >>> 01/15/01 12:20PM >>> > >> The problem with the latest LAZARUS code is again in the resources unit. > When it doesn't find the TToolbutton resource it goes to load DEFAULT. When > it does find it, it crashes on the line > >> > >> Result := LResource(FList[p]^); > >> wher p = 20. I'm not sure what the problem is yet with this line though. > >> > >> Shane > >> > >> >>> 01/15/01 10:40AM >>> > >> OK, I have looked at this problem and I'm not sure what's cauing it but > on this PC I can't run it either. > >> > >> I am still looking into it. > >> > >> Shane > >> > >> >>> 01/15/01 09:19AM >>> > >> > Two things: Make sure you have pulled the latest version of LAzarus > from CVS. Also, make sure you are using > >> > > >> > make clean > >> > make lazarus > >> > > >> > the first time you do this and be sure you have FPC version 1.0.5 > >> > >> My problems seem to be a lot like his, and I tried to k (s- under > linux)trace > >> the problem points. > >> > >> Seems that failed read's (resource not ready or busy) from descriptors > >> created by a socket call are the problem. > >> > >> I also have a feeling the problems are within the linked in libraries. > (by > >> examining the traceback from -gl), what GTK version is now recommended?

Yes, there still seems to be SOME problem with how everything is being compiled. When I encounter this I do this: make clean make lazarus ./lazarus If it crashes I do this: make clean go into designer, lcl, lcl/interfaces/gtk and delete all the *.o and *.ppu files make lazarus ./lazarus if it crashes I try this make clean touch lcl/controls.pp make lazarus if it crashes I do this OPen uniteditor.pp. Change something, then change it back. Save it. OPen customformeditor.pp. Change something, then change it back. make lazarus If it crashes I start with the swearing (ok, I started that a while back) and I punt. I have setup my ppc386.cfg file to work and so I can do this: ppc386 -B lazarus.pp Sometimes that will work. I don't know what the problem is. It doesn't seem to be in the code because it's not consistent. Shane -----Original Message----- From: Andy Clay To: Date: Monday, January 15, 2001 6:54 PM Subject: Re: [lazarus] Run error FIXED!!! >I just did a cvs update lazarus, make clean, make - and it still errors >on running. I am using 1.0.5 compiler. > >response to run is - > >LM_SCREENINIT called --> should go to GTKObject.Init >TODO: check this >[TCustomForm.Create] Resource 'TSPLASHFORM' not found >This is for information purposes only. This is not critical at this >time. >[TCustomForm.Create] Resource 'TMAINIDE' not found >This is for information purposes only. This is not critical at this >time. >An unhandled exception occurred at 0x080E00FF : >Access violation > 0x080E00FF > 0xBFFFF5F0 > 0x080E0F6E > 0xBFFFF618 >An unhandled exception occurred at 0x080DCDBA : >Access violation > 0x080DCDBA > 0x3020200C > 0x00000000 > >An unhandled exception occurred at 0x00000020 : >Access violation > 0x00000020 > 0x080B0FFC > 0x080E1BCF > 0x080B12BF > 0x080D3C8B > 0x080D3C37 > 0x080B8955 > 0xBFFFF70C >An unhandled exception occurred at 0x080DCDBA : >Access violation > 0x080DCDBA > 0x3020200C > 0x00000000 > >[TgtkObject.Destroy] WARNING: There are 24 unreleased DCs and 127 >unreleased GDIObjects >[TgtkObject.Destroy] WARNING: There are 4 messages left in the queue! >I'll free them >An unhandled exception occurred at 0x080E00C8 : >Access violation > 0x080E00C8 > 0x00000001 > 0x081360DC > > >Cheers... Andy > >Shane Miller wrote: >> >> OK, I found the error. It was actually an error in Main.pp but the exception was thrown in the resources file. >> >> Either way, it's fixed. Please pull from CVS to get the latest verison of Lazarus. >> >> Please email the list that I am correct that this error is fixed now. >> >> Thanks >> Shane >> >> >>> 01/15/01 12:20PM >>> >> The problem with the latest LAZARUS code is again in the resources unit. When it doesn't find the TToolbutton resource it goes to load DEFAULT. When it does find it, it crashes on the line >> >> Result := LResource(FList[p]^); >> wher p = 20. I'm not sure what the problem is yet with this line though. >> >> Shane >> >> >>> 01/15/01 10:40AM >>> >> OK, I have looked at this problem and I'm not sure what's cauing it but on this PC I can't run it either. >> >> I am still looking into it. >> >> Shane >> >> >>> 01/15/01 09:19AM >>> >> > Two things: Make sure you have pulled the latest version of LAzarus from CVS. Also, make sure you are using >> > >> > make clean >> > make lazarus >> > >> > the first time you do this and be sure you have FPC version 1.0.5 >> >> My problems seem to be a lot like his, and I tried to k (s- under linux)trace >> the problem points. >> >> Seems that failed read's (resource not ready or busy) from descriptors >> created by a socket call are the problem. >> >> I also have a feeling the problems are within the linked in libraries. (by >> examining the traceback from -gl), what GTK version is now recommended?

OK, I found the error. It was actually an error in Main.pp but the exception was thrown in the resources file. Either way, it's fixed. Please pull from CVS to get the latest verison of Lazarus. Please email the list that I am correct that this error is fixed now. Thanks Shane >>> 01/15/01 12:20PM >>> The problem with the latest LAZARUS code is again in the resources unit. When it doesn't find the TToolbutton resource it goes to load DEFAULT. When it does find it, it crashes on the line Result := LResource(FList[p]^); wher p = 20. I'm not sure what the problem is yet with this line though. Shane >>> 01/15/01 10:40AM >>> OK, I have looked at this problem and I'm not sure what's cauing it but on this PC I can't run it either. I am still looking into it. Shane >>> 01/15/01 09:19AM >>> > Two things: Make sure you have pulled the latest version of LAzarus from CVS. Also, make sure you are using > > make clean > make lazarus > > the first time you do this and be sure you have FPC version 1.0.5 My problems seem to be a lot like his, and I tried to k (s- under linux)trace the problem points. Seems that failed read's (resource not ready or busy) from descriptors created by a socket call are the problem. I also have a feeling the problems are within the linked in libraries. (by examining the traceback from -gl), what GTK version is now recommended? _________________________________________________________________ To unsubscribe: mail with "unsubscribe" as the Subject archives at http://www.miraclec.com/list_archives/lazarus _________________________________________________________________ To unsubscribe: mail with "unsubscribe" as the Subject archives at http://www.miraclec.com/list_archives/lazarus _________________________________________________________________ To unsubscribe: mail with "unsubscribe" as the Subject archives at http://www.miraclec.com/list_archives/lazarus _________________________________________________________________ To unsubscribe: mail with "unsubscribe" as the Subject archives at http://www.miraclec.com/list_archives/lazarus

Hey try this: Update from CVS type this when in the lazarus dir. make clean; make OPT=-dDEBUG ./lazarus That seems to work for me. Shane

>>> 01/16/01 10:18AM >>> I have the same problem and I cannot solve it. I surrender. :-) Shane Miller wrote: > > Yes, there still seems to be SOME problem with how everything is being > compiled. > > When I encounter this I do this: > > make clean > make lazarus > ./lazarus > > If it crashes I do this: > > make clean > go into designer, lcl, lcl/interfaces/gtk and delete all the *.o and *.ppu > files > make lazarus > ./lazarus > if it crashes I try this > > make clean > touch lcl/controls.pp > make lazarus > > if it crashes I do this > OPen uniteditor.pp. Change something, then change it back. Save it. OPen > customformeditor.pp. Change something, then change it back. > make lazarus > > If it crashes I start with the swearing (ok, I started that a while back) > and I punt. I have setup my ppc386.cfg file to work and so I can do this: > > ppc386 -B lazarus.pp > Sometimes that will work. > > I don't know what the problem is. It doesn't seem to be in the code because > it's not consistent. > > Shane > > -----Original Message----- > From: Andy Clay > To: > Date: Monday, January 15, 2001 6:54 PM > Subject: Re: [lazarus] Run error FIXED!!! > > >I just did a cvs update lazarus, make clean, make - and it still errors > >on running. I am using 1.0.5 compiler. > > > >response to run is - > > > >LM_SCREENINIT called --> should go to GTKObject.Init > >TODO: check this > >[TCustomForm.Create] Resource 'TSPLASHFORM' not found > >This is for information purposes only. This is not critical at this > >time. > >[TCustomForm.Create] Resource 'TMAINIDE' not found > >This is for information purposes only. This is not critical at this > >time. > >An unhandled exception occurred at 0x080E00FF : > >Access violation > > 0x080E00FF > > 0xBFFFF5F0 > > 0x080E0F6E > > 0xBFFFF618 > >An unhandled exception occurred at 0x080DCDBA : > >Access violation > > 0x080DCDBA > > 0x3020200C > > 0x00000000 > > > >An unhandled exception occurred at 0x00000020 : > >Access violation > > 0x00000020 > > 0x080B0FFC > > 0x080E1BCF > > 0x080B12BF > > 0x080D3C8B > > 0x080D3C37 > > 0x080B8955 > > 0xBFFFF70C > >An unhandled exception occurred at 0x080DCDBA : > >Access violation > > 0x080DCDBA > > 0x3020200C > > 0x00000000 > > > >[TgtkObject.Destroy] WARNING: There are 24 unreleased DCs and 127 > >unreleased GDIObjects > >[TgtkObject.Destroy] WARNING: There are 4 messages left in the queue! > >I'll free them > >An unhandled exception occurred at 0x080E00C8 : > >Access violation > > 0x080E00C8 > > 0x00000001 > > 0x081360DC > > > > > >Cheers... Andy > > > >Shane Miller wrote: > >> > >> OK, I found the error. It was actually an error in Main.pp but the > exception was thrown in the resources file. > >> > >> Either way, it's fixed. Please pull from CVS to get the latest verison > of Lazarus. > >> > >> Please email the list that I am correct that this error is fixed now. > >> > >> Thanks > >> Shane > >> > >> >>> 01/15/01 12:20PM >>> > >> The problem with the latest LAZARUS code is again in the resources unit. > When it doesn't find the TToolbutton resource it goes to load DEFAULT. When > it does find it, it crashes on the line > >> > >> Result := LResource(FList[p]^); > >> wher p = 20. I'm not sure what the problem is yet with this line though. > >> > >> Shane > >> > >> >>> 01/15/01 10:40AM >>> > >> OK, I have looked at this problem and I'm not sure what's cauing it but > on this PC I can't run it either. > >> > >> I am still looking into it. > >> > >> Shane > >> > >> >>> 01/15/01 09:19AM >>> > >> > Two things: Make sure you have pulled the latest version of LAzarus > from CVS. Also, make sure you are using > >> > > >> > make clean > >> > make lazarus > >> > > >> > the first time you do this and be sure you have FPC version 1.0.5 > >> > >> My problems seem to be a lot like his, and I tried to k (s- under > linux)trace > >> the problem points. > >> > >> Seems that failed read's (resource not ready or busy) from descriptors > >> created by a socket call are the problem. > >> > >> I also have a feeling the problems are within the linked in libraries. > (by > >> examining the traceback from -gl), what GTK version is now recommended?

Hey try this: Update from CVS type this when in the lazarus dir. make clean; make OPT=-dDEBUG ./lazarus That seems to work for me. Shane >>> 01/16/01 10:18AM >>> I have the same problem and I cannot solve it. I surrender. :-) Shane Miller wrote: > > Yes, there still seems to be SOME problem with how everything is being > compiled. > > When I encounter this I do this: > > make clean > make lazarus > ./lazarus > > If it crashes I do this: > > make clean > go into designer, lcl, lcl/interfaces/gtk and delete all the *.o and *.ppu > files > make lazarus > ./lazarus > if it crashes I try this > > make clean > touch lcl/controls.pp > make lazarus > > if it crashes I do this > OPen uniteditor.pp. Change something, then change it back. Save it. OPen > customformeditor.pp. Change something, then change it back. > make lazarus > > If it crashes I start with the swearing (ok, I started that a while back) > and I punt. I have setup my ppc386.cfg file to work and so I can do this: > > ppc386 -B lazarus.pp > Sometimes that will work. > > I don't know what the problem is. It doesn't seem to be in the code because > it's not consistent. > > Shane > > -----Original Message----- > From: Andy Clay > To: > Date: Monday, January 15, 2001 6:54 PM > Subject: Re: [lazarus] Run error FIXED!!! > > >I just did a cvs update lazarus, make clean, make - and it still errors > >on running. I am using 1.0.5 compiler. > > > >response to run is - > > > >LM_SCREENINIT called --> should go to GTKObject.Init > >TODO: check this > >[TCustomForm.Create] Resource 'TSPLASHFORM' not found > >This is for information purposes only. This is not critical at this > >time. > >[TCustomForm.Create] Resource 'TMAINIDE' not found > >This is for information purposes only. This is not critical at this > >time. > >An unhandled exception occurred at 0x080E00FF : > >Access violation > > 0x080E00FF > > 0xBFFFF5F0 > > 0x080E0F6E > > 0xBFFFF618 > >An unhandled exception occurred at 0x080DCDBA : > >Access violation > > 0x080DCDBA > > 0x3020200C > > 0x00000000 > > > >An unhandled exception occurred at 0x00000020 : > >Access violation > > 0x00000020 > > 0x080B0FFC > > 0x080E1BCF > > 0x080B12BF > > 0x080D3C8B > > 0x080D3C37 > > 0x080B8955 > > 0xBFFFF70C > >An unhandled exception occurred at 0x080DCDBA : > >Access violation > > 0x080DCDBA > > 0x3020200C > > 0x00000000 > > > >[TgtkObject.Destroy] WARNING: There are 24 unreleased DCs and 127 > >unreleased GDIObjects > >[TgtkObject.Destroy] WARNING: There are 4 messages left in the queue! > >I'll free them > >An unhandled exception occurred at 0x080E00C8 : > >Access violation > > 0x080E00C8 > > 0x00000001 > > 0x081360DC > > > > > >Cheers... Andy > > > >Shane Miller wrote: > >> > >> OK, I found the error. It was actually an error in Main.pp but the > exception was thrown in the resources file. > >> > >> Either way, it's fixed. Please pull from CVS to get the latest verison > of Lazarus. > >> > >> Please email the list that I am correct that this error is fixed now. > >> > >> Thanks > >> Shane > >> > >> >>> 01/15/01 12:20PM >>> > >> The problem with the latest LAZARUS code is again in the resources unit. > When it doesn't find the TToolbutton resource it goes to load DEFAULT. When > it does find it, it crashes on the line > >> > >> Result := LResource(FList[p]^); > >> wher p = 20. I'm not sure what the problem is yet with this line though. > >> > >> Shane > >> > >> >>> 01/15/01 10:40AM >>> > >> OK, I have looked at this problem and I'm not sure what's cauing it but > on this PC I can't run it either. > >> > >> I am still looking into it. > >> > >> Shane > >> > >> >>> 01/15/01 09:19AM >>> > >> > Two things: Make sure you have pulled the latest version of LAzarus > from CVS. Also, make sure you are using > >> > > >> > make clean > >> > make lazarus > >> > > >> > the first time you do this and be sure you have FPC version 1.0.5 > >> > >> My problems seem to be a lot like his, and I tried to k (s- under > linux)trace > >> the problem points. > >> > >> Seems that failed read's (resource not ready or busy) from descriptors > >> created by a socket call are the problem. > >> > >> I also have a feeling the problems are within the linked in libraries. > (by > >> examining the traceback from -gl), what GTK version is now recommended? -- |-----------------------------| | Luis R. Hilario | | http://www.luisdigital.2y.net | |-----------------------------| _________________________________________________________________ To unsubscribe: mail with "unsubscribe" as the Subject archives at http://www.miraclec.com/list_archives/lazarus _________________________________________________________________ To unsubscribe: mail with "unsubscribe" as the Subject archives at http://www.miraclec.com/list_archives/lazarus