(w32 / vista)
I tried to recompile fpc trunk, it starts up fine, until it comes to fcl-web. I copied the last lines of output to the end of the mail

Not sure about the exact make command that was running, since they come from a batch file, but probably the 2nd line:
make.exe clean distclean
make.exe all LINKSMART=1 CREATESMART=1 OPTIMIZE=1 OPT="-gl -O3 -Or -CpPENTIUMM -OpPENTIUMM" TARGET_EXAMPLES=NO FPC=c:\FPC\SVN\ppc386_2_4_2.exe make.exe install INSTALL_PREFIX=c:\FPC\trunk\ COPYTREE=echo UPXPROG=echo

Found this in svn, and will try with the revision before...

Revision: 17223
Author: joost
Date: 14:33:56, 02 April 2011
Message:
* Let the makefile create the unit output dir when fpmake.pp is not compiled yet
----
Modified : /trunk/packages/fcl-web/Makefile
Modified : /trunk/packages/fcl-web/Makefile.fpc

make.exe[3]: Entering directory `C:/FPC/SVN/trunc/packages/fastcgi' make.exe all LINKSMART=1 CREATESMART=1
make.exe[4]: Entering directory `C:/FPC/SVN/trunc/packages/fastcgi' C:/FPC/SVN/trunk_build/gmkdir.exe -p units/i386-win32 C:/FPC/SVN/trunc/compiler/ppc386.exe -XX -CX -Ur -Xs -O2 -n -O2 -S2h -FuC:/FPC/SVN/trunc/rtl/units/i386-win32 -FE. -FUunits/i386-win32 -gl - O3 -Or -CpPENTIUMM -OpPENTIUMM -di386 -dRELEASE src/fastcgi.pp make.exe[4]: Leaving directory `C:/FPC/SVN/trunc/packages/fastcgi' make.exe[3]: Leaving directory `C:/FPC/SVN/trunc/packages/fastcgi' make.exe -C fcl-web smart
make.exe[3]: Entering directory `C:/FPC/SVN/trunc/packages/fcl-web' C:/FPC/SVN/trunc/compiler/ppc386.exe fpmake.pp -XX -CX -Ur -Xs -O2 -n -O2 -FuC:/FPC/SVN/trunc/rtl/units/i386-win32 -FuC:/FPC/SVN/trunc/packa ges/hash/units/i386-win32
-FuC:/FPC/SVN/trunc/packages/paszlib/units/i386-win32 -FuC:/FPC/SVN/trunc/packages/fcl-process/units/i386-win32 -F uC:/FPC/SVN/trunc/packages/fpmkunit/units/i386-win32 -FE. -FUunits/i386-win32 -gl -O3 -Or -CpPENTIUMM -OpPENTIUMM -di386 -dRELEASE ./fpmake build --localunitdir=../.. --globalunitdir=.. --os=win32 --cpu=i386 -o -XX -o -CX -o -Ur -o -Xs -o -O2 -o -n -o -O2 -o -FuC:/FPC/SV N/trunc/rtl/units/i386-win32 -o
-FuC:/FPC/SVN/trunc/packages/hash/units/i386-win32 -o -FuC:/FPC/SVN/trunc/packages/paszlib/units/i386-win32 -o -FuC:/FPC/SVN/trunc/packages/fcl-process/units/i386-win32 -o -FuC:/FPC/SVN/trunc/packages/fpmkunit/units/i386-win32 -o -FE. -o -FUunits/i 386-win32 -o -gl -o -O3 -o -Or -o -CpPENTIUMM -o -OpPENTIUMM -o -di386 -o -dRELEASE --compiler=C:/FPC/SVN/trunc/compiler/ppc386.exe -o "-XX -CX"
'.' is not recognized as an internal or external command, operable program or batch file.
make.exe[3]: *** [smart] Error 1
make.exe[3]: Leaving directory `C:/FPC/SVN/trunc/packages/fcl-web' make.exe[2]: *** [fcl-web_smart] Error 2
make.exe[2]: Leaving directory `C:/FPC/SVN/trunc/packages' make.exe[1]: *** [packages_smart] Error 2
make.exe[1]: Leaving directory `C:/FPC/SVN/trunc'
make.exe: *** [build-stamp.i386-win32] Error 2

no difference, same error

anyone any idea, how I can compile trunk?

Martin

03.04.2011 23:59, Martin пишет:

no difference, same error anyone any idea, how I can compile trunk?

Quoting Joost:

"If you are really stuck, the old Makefile.fpc is copied to Makefile.org. Copy the Makefile.org to Makefile.fpc, and run 'fpcmake -TAll' in the fcl-web directory. And don't forget to report your problems."

thanks I will try.

Compiling on windows => slow

just some more info.

after trying (and getting the error) to compile with rev 17222, I went to the director (to rename the old makefile).

There is a fpmake.exe, with todays date, and a 3 minute old timestamp. I do not know if that was created by this attempt, or by the previous attempt (that was with includign the above revision)

Martin

Are you doing a cross-compilation? In that case the fpmake.exe is probably build for the target you were compiling for.

Joost.

No, its the same win32 snapshot & method of doing it that I've been doing every day for for years! not x compile. I just sent an extract from the log asuming that it'd be obvious, as I've done for the errors I've had in the past. I can send yoiu the whole log if you really need it.

I don't know what you mean about the fpmake.exe being the wrong one- I just zap all dirs, do a svn of the whole trunk v25 etc & was assuming that it'd work as usual... but it didn't! So the make it isn't compatible with the prev versions. A similar fault was also reported by someone else in an email I saw yesterday?

J.

Are you doing a cross-compilation? In that case the fpmake.exe is probably build for the target you were compiling for.

Joost.

No i didn't cross compile.. just my usual windows vita 32 bit ...

it failed in the "make all" with the params given above

Here is beginning and the end of today's snapshot make from zapped directories and a new svn co - the whole thing is 13K zipped - you can have it if you really want! J

C:/PP/BIN/WIN32/MAKE.EXE compiler_cycle RELEASE=1
MAKE.EXE[1]: Entering directory `D:/fpk'
C:/PP/BIN/WIN32/MAKE.EXE -C compiler cycle
MAKE.EXE[2]: Entering directory `D:/fpk/compiler'
C:/PP/BIN/WIN32/MAKE.EXE tempclean ppc3.exe
MAKE.EXE[3]: Entering directory `D:/fpk/compiler'
C:/PP/BIN/WIN32/rm.exe -f ppcross386.exe ppc.exe ppc1.exe ppc2.exe ppc3.exe ./ms
C:/PP/BIN/WIN32/MAKE.EXE 'OLDFPC=' next
MAKE.EXE[4]: Entering directory `D:/fpk/compiler'
C:/PP/BIN/WIN32/MAKE.EXE rtlclean rtl
MAKE.EXE[5]: Entering directory `D:/fpk/compiler'
C:/PP/BIN/WIN32/MAKE.EXE -C d:/fpk/rtl clean
MAKE.EXE[6]: Entering directory `d:/fpk/rtl'
C:/PP/BIN/WIN32/rm.exe -f fpcmade.i386-win32 Package.fpc ppas.bat script.res lin
C:/PP/BIN/WIN32/rm.exe -f *.s *_ppas.bat
C:/PP/BIN/WIN32/MAKE.EXE -C win32 clean
MAKE.EXE[7]: Entering directory `d:/fpk/rtl/win32' C:/PP/BIN/WIN32/rm.exe -fd:/fpk/rtl/units/i386-win32/system.ppu d:/fpk/rtl/unit
C:/PP/BIN/WIN32/rm.exe -fd:/fpk/rtl/units/i386-win32/math.rst d:/fpk/rtl/units/
C:/PP/BIN/WIN32/rm.exe -f fpcmade.i386-win32 Package.fpc ppas.bat script.res lin
C:/PP/BIN/WIN32/rm.exe -f *.s *_ppas.bat
MAKE.EXE[7]: Leaving directory `d:/fpk/rtl/win32'
MAKE.EXE[6]: Leaving directory `d:/fpk/rtl'

big snip

MAKE.EXE[4]: Leaving directory `D:/fpk/packages/httpd22' MAKE.EXE[3]: Leaving directory `D:/fpk/packages/httpd22' C:/PP/BIN/WIN32/MAKE.EXE -C fastcgi smart
MAKE.EXE[3]: Entering directory `D:/fpk/packages/fastcgi' C:/PP/BIN/WIN32/MAKE.EXE all LINKSMART=1 CREATESMART=1 MAKE.EXE[4]: Entering directory `D:/fpk/packages/fastcgi' C:/PP/BIN/WIN32/mkdir.exe -p units/i386-win32
D:/fpk/compiler/ppc386.exe -XX -CX -Ur -Xs -O2 -n -S2h -Fud:/fpk/rtl/units/i386-
MAKE.EXE[4]: Leaving directory `D:/fpk/packages/fastcgi' MAKE.EXE[3]: Leaving directory `D:/fpk/packages/fastcgi' C:/PP/BIN/WIN32/MAKE.EXE -C fcl-web smart
MAKE.EXE[3]: Entering directory `D:/fpk/packages/fcl-web' C:/PP/BIN/WIN32/mkdir.exe -p units/i386-win32
D:/fpk/compiler/ppc386.exe fpmake.pp -Ur -Xs -O2 -n -Fud:/fpk/rtl/units/i386-win
./fpmake build --localunitdir=../.. --globalunitdir=.. --os=win32 --cpu=i386 -o
MAKE.EXE[3]: *** [smart] Error 2
MAKE.EXE[3]: Leaving directory `D:/fpk/packages/fcl-web' MAKE.EXE[2]: *** [fcl-web_smart] Error 2
MAKE.EXE[2]: Leaving directory `D:/fpk/packages'
MAKE.EXE[1]: *** [packages_smart] Error 2
MAKE.EXE[1]: Leaving directory `D:/fpk'

Are you doing a cross-compilation? In that case the fpmake.exe is probably build for the target you were compiling for.

Joost.